Article

How Much Does a Fence Cost in Brisbane?

Let me give you the thing most fencing websites won't: an actual number, up front, before you've filled in a single form.

In Brisbane in 2026, supplied-and-installed fencing runs anywhere from about $80 a metre at the basic end up to $250–$300 a metre for premium and specialty jobs — and higher again for feature fencing like glass or masonry. Where a job lands in that spread depends as much on who builds it and what's included as on the fence itself. For a typical suburban boundary of 40 to 45 metres, most standard jobs fall somewhere in the $5,000 to $10,000 range all up.

That's a wide spread, and the honest reason is that "a fence" isn't one product — it's a dozen decisions, and quality varies enormously between contractors. So let me break down what actually moves the price, so you can look at your own place and land on a realistic figure rather than a fantasy one.

Ballpark per-metre rates (installed)

  • Colorbond: roughly $100–$200 a metre, with quality licensed installs typically landing around $150–$180/m. (Be wary of very cheap "$80/m" Colorbond offers — the old low guides are outdated, and a price well under the market usually means corners cut where you can't see.)
  • Timber paling: roughly $75–$190 a metre — treated pine at the lower end, hardwood at the top.
  • Aluminium fencing: roughly $150–$300 a metre.
  • Glass pool fencing: roughly $250–$600+ a metre.
  • Brick or block fencing: roughly $550–$1,200+ a metre.

Those are genuine Brisbane market ranges for 2026 — the full spread, not a lowball to get you calling. Premium companies quote toward the top of each band and cut-price operators toward the bottom, and the gap between them is almost always the quality of the build you can't see. Where you land inside these depends on the factors below.

What makes the price move

Material and style. The single biggest lever — Colorbond vs timber vs pool fencing, and within timber, pine vs hardwood. Choose the material first; it sets the base rate.

Height. The standard is 1.8m. Going to 2.1m for extra privacy typically adds around 15–20%, because it's more material and more structure.

Removing the old fence. Usually adds about $15–$50 a metre. It's real labour and real tip fees. If a quote doesn't mention removal, that's not a saving — it's a cost hiding offstage.

Your block's slope. Brisbane blocks are rarely flat. A sloped or uneven site typically adds 10–30%, because stepping or raking a fence to follow the land properly takes more work and materials.

Access. No side gate, a steep driveway, or ground that forces hand-digging instead of a machine all add labour. It should be quoted honestly, not sprung on you later.

Gates. Number, size and type. A manual pedestrian gate is cheap; wide double gates or anything automated adds up.

Retaining or ground issues. If the fence involves retaining, or the ground needs work first, that's a separate and significant cost — and one worth getting right, because a fence on a failing wall is money lost twice.

Why the cheapest quote usually isn't the cheapest fence

When you gather a few quotes, one is often well below the others, and it's tempting to just take it. But nobody buys materials meaningfully cheaper than everyone else — so a much lower price almost always means less work: shallower footings, wider post spacing, the old-fence removal left out, the slope ignored until it becomes a "variation." You meet that missing cost later, as a repair or a surprise bill.

The smarter move isn't to buy the dearest quote either — it's to compare fairly. Line the quotes up and check each for the same things: scope in writing, footings, removal, rubbish, exclusions, licence and insurance. Do that and the "cheap" one usually turns out to be incomplete, not cheap. (We've written a full guide on comparing quotes and one on the real risks of the cheapest quote — both worth reading before you decide.)

Why we quote in person

You'll notice I've given you ranges, not a fixed price for your fence — and that's deliberate, not evasive. An accurate price depends on your slope, your access, the state of your old fence and your soil, and none of that is visible from a photo or a map. Anyone who quotes your exact job sight-unseen is guessing, and guesses turn into variations once the work starts.

So we walk the block, look at the things that actually set the price, and give you a real number you can rely on — a preliminary quote within 24 hours, then a site visit for the formal one. And whatever we quote, we tell you what's included and what isn't, so you're comparing the whole job, not a headline.

Use the ranges above to sanity-check your budget. Then get a proper in-person quote and compare it fairly. That's how you end up paying for your fence once. And that's the difference — it's in the details of the quote as much as the fence.

Servicing Brisbane and the Gold Coast — in-person quotes, clear inclusions, preliminary quote within 24 hours. QBCC Licence 15416911.

More Blogs

Home Warranty Insurance: When Your Job Is Actually Covered — And What That Premium Buys You
Read more
The Complete Guide to Colorbond Fencing in Brisbane
Read more
The Complete Guide to Timber Fencing in Brisbane
Read more
Colorbond vs Timber: Which Fence Is Right for Your Home?
Read more
The Signs of a Quality Fencing Contractor
Read more
You can't see good work until you see better
Read more
The questions that protect you before you pay
Read more
Why we always quote in person, not over the phone
Read more
Sharing a fence with your neighbour and how to handle it well
Read more
The details that make a fence worth the investment
Read more